Siemens Inteli Compact

• Line-side diode rectifier
• DC link electrolytic capacitors with pre-charging circuit
• Output inverter
• Braking chopper for (external) braking resistor
• 24 V DC / 1 A power supply
• Gating unit, actual value acquisition
• Internal liquid cooling
• The Block size Liquid Cooled Power Modules cover the power range from 18.5 kW to 90.0 kW and are available without an integrated line filter.
• Power Module frame size FSD Liquid Cooled Power Module frame size FSE Liquid Cooled

• 3 Phase Synchronizing Controller for multiple generators
• In-built protections for Engine, Generator and Mains: Over current, Overload,Reverse Power, Over/Under voltage, Low oil pressure, High water temp, Over speed
• Engine, Generator and Mains measurements: Oil Pressure, Temperature, Speed, V/I/Hz/ KW/ KVAR/KVA/PF/KWH/KVAHr.
• Reliable and accurate synchronizing, Active and Reactive load sharing.
• Configurable binary 9 Input, 8 outputs and 3 Analogue Inputs.
• Event based history file with upto 200 records.
• For added functions, wide choice of extension modules like I/O module, display module is available.
• Communication options like RS232 / RS485, MODBUS, CAN BUS, GSM, CDMA, TCP/IP.
• Grid paralleling is possible with Import / Export control.
• Power management with load dependant Start-Stop.
• Voltage and Power Factor control
• Support to Electronic engines with diagnostic messages in plain text
• Magnetic Pick-up input
• Remote monitoring and control through Internet

Major Features
• 3 Phase AMF Controller for single generating set.
• Automatic or manual start-stop of the Gen-set
• 3 Phase generator monitoring : V / I / PF / Frequency / Kw / KVAr / KWH
• 3 Phase Mains monitoring : Voltage / Frequency
• Generator Protections : Over/Under Voltage, Over Current, Short circuit, Frequency
• Engine Protections: Over speed, Under speed, Battery Voltage, Programmable analogue input protections.
• Configurable 7 binary Inputs/Outputs and 3 Analogue Inputs
• Support to Electronic engines (CAN with J1939)
• Event and performance log
• Generator and Mains breaker control with feedback
• Remote monitoring via GSM/GPRS/Internet
• Dual AMF function

InteliMains IM - NT (Mains Supervision controller)

• Phase controller for multiple Generators operating parallel to Mains
• 3 Phase Mains Protections for Voltage and Frequency, Mains IDMT Over current protection, Vector shift protection
• Mains measurements: V/I/Hz/ KW/ KVAR/KVA/PF/KWH imp /KWH exp/KVAHr imp/exp.
• MCB and MGCB Control
• Can be also used in Bus-Tie breaker mode with Bus measurements for V and Hz
• Configurable binary 6 Input, 6 outputs
• Event based history file with upto 500 records.
• Voltage and Power Factor control
• Graphic 128 X 64 pixels display
• Magnetic Pick-up input

• 3 Phase Synchronizing Controller for multiple generators
• In-built protections for Engine, Generator and Mains: Over current, Overload,Reverse Power, Over/Under voltage, Low oil pressure, High water temp, Over speed
• Engine, Generator and Mains measurements: Oil Pressure, Temperature, Speed, V/I/Hz/ KW/ KVAR/KVA/PF/KWH/KVAHr.
• Reliable and accurate synchronizing, Active and Reactive load sharing.
• Configurable binary 9 Input, 8 outputs and 3 Analogue Inputs.
• Event based history file with upto 200 records.
• For added functions, wide choice of extension modules like I/O module, display module is available.
• Communication options like RS232 / RS485, MODBUS, CAN BUS, GSM, CDMA, TCP/IP.
• Grid paralleling is possible with Import / Export control.
• Power management with load dependant Start-Stop.
• Voltage and Power Factor control
• Support to Electronic engines with diagnostic messages in plain text
• Magnetic Pick-up input
• Remote monitoring and control through Internet