Siemo Service, Chennai

• Touch Panel for operator control and monitoring of small machines and plants
• Low-cost entry-level product in the category of touch panels with graphic capability and all the basic functions required for simple tasks
• Pixel graphics 5.7" STN touch screen (analog/resistive), Blue mode (4 levels)
• Specially for Simatic S7-200: Communication to the PLC through the integrated interface over a point-to-point link
• Connection to the PLC over MPI or Profibus DP cable
• Simatic TP 177micro is the innovative successor to the Touch Panels Simatic TP 070/TP 170micro
• 5.7 STN display, CCFL1) backlit, Blue mode (4 levels)
• Resistive analog Touch
• Compact design with small installation depth
• Rugged plastic housing
• The front is resistant to various oils, greases and standard detergents
• Numeric system keyboard for decimal, binary and hexadecimal number formats
• On-screen alphanumeric keyboard
• Plug-in terminals for connecting a 24 V DC power supply
• RS 485 interface for connection of the MPI cable or the PPI adaptor

• The user-friendly text display for the S7-200
• For control and monitoring, Message text display, intervention in PLC program, setting of inputs and outputs
• Direct connection to CPU interface using supplied cable or incorporation into network (also via EM 277)
• No separate power supply required
• No separate parameterization software required
• Addressing and setting of contrast in supplied menu The TD 200 is simply connected to the PPI interface of the S7-200 using the supplied connecting cable. A separate power supply is not required. It is also possible to connect several TD 200 units to one S7-200.

• Rugged plastics housing with degree of protection IP65 (front): Increased watertightness due to absence of slots for labeling strips
• Mounting depth 27 mm: The TD 200 can be mounted without additional accessories in control cabinets or operator panels, or used as a handheld unit
• Backlit LC display; readable even under unfavorable lighting
• Ergonomically designed input keys, below which are programmable function keys
• Integrated interface for connection of cable
• Connection for optional power supply: A power supply unit is required if the distance between the TD 200 and S7-200 is more than 2.5 m. Profibus cables are then available instead of the connection cable
• Customized labeling strips: The back of the housing has to be removed to mount the labeling strips. This must, therefore, be performed before the unit is installed

• Designed specifically for applications with the SIMATIC S7-200 micro PLC, either with text display (TD) or pixel-graphic display, as operator panels (OP) with membrane keyboard or touch screen (TP).
• The user-friendly text display for the S7-200
• For control and monitoring:
• Message text display, intervention in PLC program, setting of inputs and outputs
• Direct connection to CPU interface using supplied cable or incorporation into network (also via EM 277)
• No separate power supply required
• No separate parameterization software required
• Addressing and setting of contrast in supplied menu The TD 200 is simply connected to the PPI interface of the S7-200 using the supplied connecting cable. A separate power supply is not required. It is also possible to connect several TD 200 units to one S7-200. The TD 200 features:
• Rugged plastics housing with degree of protection IP65 (front): Increased watertightness due to absence of slots for labeling strips
• Mounting depth 27 mm: The TD 200 can be mounted without additional accessories in control cabinets or operator panels, or used as a handheld unit
• Backlit LC display; readable even under unfavorable lighting
• Ergonomically designed input keys, below which are programmable function keys
• Integrated interface for connection of cable
• Connection for optional power supply: A power supply unit is required if the distance between the TD 200 and S7-200 is more than 2.5 m. PROFIBUS cables are then available instead of the connection cable
• Customized labeling strips: The back of the housing has to be removed to mount the labeling strips. This must therefore be performed before the unit is installed

• Touch Panel for operator control and monitoring of small machines and plants
• Low-cost entry-level product in the category of touch panels with graphic capability and all the basic functions required for simple tasks
• Pixel graphics 5.7" STN touch screen (analog/resistive), Blue mode (4 levels)
• Specially for Simatic S7-200: Communication to the PLC through the integrated interface over a point-to-point link
• Connection to the PLC over MPI or Profibus DP cable
• Simatic TP 177micro is the innovative successor to the Touch Panels Simatic TP 070/TP 170micro
• 5.7 STN display, CCFL1) backlit, Blue mode (4 levels)
• Resistive analog Touch
• Compact design with small installation depth
• Rugged plastic housing
• The front is resistant to various oils, greases and standard detergents
• Numeric system keyboard for decimal, binary and hexadecimal number formats
• On-screen alphanumeric keyboard
• Plug-in terminals for connecting a 24 V DC power supply
• RS 485 interface for connection of the MPI cable or the PPI adaptor

• 3.7" STN LCD backlit display: Up to 4 text lines can be configured
• Rugged plastic housing in degree of protection IP65 (on front), IP20 (on rear): Increased waterproofing because there are no slots for labelling strips
• Installation depth of 31 mm: The TD 400C can be installed in control cabinets or used as a handheld device without any other accessories
• Customizable operator interface: The design (colors, pictures, text, etc.) of the operator interface can be individually designed. Configuration is carried out with the Keypad Designer (component part of STEP 7-Micro/WIN)
• Configuration of tactile keys: Up to 15 permanently positioned, tactile keys can be assigned numerous functions (e.g. direction keys, messages, Set PLC bit)

• The user-friendly text display for the S7-200
• For control and monitoring, Message text display, intervention in PLC program, setting of inputs and outputs
• Direct connection to CPU interface using supplied cable or incorporation into network (also via EM 277)
• No separate power supply required
• No separate parameterization software required
• Addressing and setting of contrast in supplied menu The TD 200 is simply connected to the PPI interface of the S7-200 using the supplied connecting cable. A separate power supply is not required. It is also possible to connect several TD 200 units to one S7-200.

• Rugged plastics housing with degree of protection IP65 (front): Increased watertightness due to absence of slots for labeling strips
• Mounting depth 27 mm: The TD 200 can be mounted without additional accessories in control cabinets or operator panels, or used as a handheld unit
• Backlit LC display; readable even under unfavorable lighting
• Ergonomically designed input keys, below which are programmable function keys
• Integrated interface for connection of cable
• Connection for optional power supply: A power supply unit is required if the distance between the TD 200 and S7-200 is more than 2.5 m. Profibus cables are then available instead of the connection cable
• Customized labeling strips: The back of the housing has to be removed to mount the labeling strips. This must therefore be performed before the unit is installed
• More screen space and extremely good readability thanks to backlit four-line display
  Customizable operator interface with 15 tactile keys
  Acoustic and visual feedback from key operation
  Optimal support of the S7-200:
  Direct connection to the S7-200 interface via supplied cable
  No separate power supply required
  Parameterization with STEP 7-Micro/WIN V4 SP6
  The TD 400C is connected to the S7-200 using the supplied connecting cable. A separate power supply is not required. It is also possible to connect several TD 400Cs to one S7-200.

The TD 400C has the following:

• 3.7" STN LCD backlit display: Up to 4 text lines can be configured
• Rugged plastic housing in degree of protection IP65 (on front), IP20 (on rear): Increased waterproofing because there are no slots for labeling strips

• Installation depth of 31 mm: The TD 400C can be installed in control cabinets or used as a handheld device without any other accessories
• Customizable operator interface: The design (colors, pictures, text, etc.) of the operator interface can be individually designed. Configuration is carried out with the Keypad Designer (component part of STEP 7-Micro/WIN)
• Configuration of tactile keys: Up to 15 permanently positioned, tactile keys can be assigned numerous functions (e.g. direction keys, messages, Set PLC bit)
• Connection for optional power supply:
• A power supply is required at a distance of more than 2.5 m between the TD 400C and S7-200. PROFIBUS bus cables are then available in place of the supplied connecting cable

Offered in standard equipped with four relays our range of Siemens LCD Micro Panels offers the clients with innovative technology for creating a customized portal for the panels. It helps in giving an acoustic and visual feedback from key operation along with a customizable operator interface with 15 tactile keys. It also has more screen space and extremely good readability thanks to backlit four-line display.

The TD 400 has the following features:

• 3.7" STN LCD backlit display: Up to 4 text lines can be configured
• Rugged plastic housing in degree of protection IP65 (on front), IP20 (on rear): Increased waterproofing because there are no slots for labelling strips
• Installation depth of 31 mm: The TD 400C can be installed in control cabinets or used as a handheld device without any other accessories
• Customizable operator interface: The design (colors, pictures, text, etc.) of the operator interface can be individually designed. Configuration is carried out with the Keypad Designer (component part of STEP 7-Micro/WIN)
• Configuration of tactile keys: Up to 15 permanently positioned, tactile keys can be assigned numerous functions (e.g. direction keys, messages, Set PLC bit)