Siemo Service, Chennai

Our company is engaged in offering an exclusive array of Distributed I/O System - ET200S. The ET 200S distributed I/O system is a discretely modular, highly flexible DP slave for connection to process signals on a central controller or a field bus. ET-200S supports field bus types PROFIBUS DP and PROFINET IO. ET 200S has protection class IP 20.

Applications:
You can connect virtually any number of I/O modules in virtually any combination right next to the interface module that transfers the data to the central controller. You can thus set the focus of your configuration on local requirements. Depending on the interface module, each ET 200S can consist of up to 63 modules – for example, power modules, I/O modules, and motor starters. The fact that motor starters can be integrated (switching and protecting any three-phase load up to 7.5 kW) ensures that the ET 200S can be quickly adapted to suit virtually any process related use of your machine. The fail-safe modules of the ET200S ensure the fail-safe reading and output of data to safety category 4 (EN 954-1)

The ET-200S distributed I/O system is:

• Connected to PROFIBUS DP by means of a cable connector for PROFIBUS DP at the IM151-1 or 1M151-1 COMPACT interface module and
• Connected to PROFINET IO at the IM151-3PN interface module by a plug connector for PROFINET IO Every ET 200S peripheral system is
• A DP slave on the PROFIBUS DP or
• An IO device on the PROFINET IO.
• Distributed I/O system to degree of protection IP20 with minimal wiring outlay, also for extremely time-critical tasks such as high-speed closed-loop controls
• Can be used with integrated S7-CPU as mini PLC
• Also available as fail-safe Profi safe version
• With optional lower-level Profibus DP
• Discretely-modular design for exact adaptation to the automation task in hand.
• Interface modules available with Profibus DP or Profinet interfaces
• Can be combined from digital and analog in/output modules, technology modules, motor starters and frequency converters for the control of drives up to 7.5 or 4 kW.
• Exchange of modules during operation (hot swapping), permanent wiring with mulch-conductor connection
• Channel-specific diagnostics for high availability
• Can be supplied with integrated fiber optic interface if required
• Transmission rates up to 12 Mbit/s
• FastConnect using unstripped quick connection technology, screw or spring-loaded terminals
• Ex approval to Cat. 3 for Zone 2 acc. to ATEX100 a
• Slot reservation with spare modules
• Fail-safe DI modules with safety-related signal processing according to PROFIsafe
• Option handling – for simplest management of machine options

We are one of the pioneers engaged in offering the best quality range of Distributed I/O System- ET-200M. Its modules can be replaced during operation (hot swapping) with the bus modules active.

Features:

• Modular I/O system with degree of protection IP20, particularly suitable for user-specific and complex automation tasks
• Can be expanded with S7-300 automation system signal, communication and function modules
• Applicable Ex analog input or output modules with HART optimize the ET 200M for use in process engineering
• Can be used in redundant systems (S7-400H, S7-400F/FH)
• Consists of a PROFIBUS DP IM 153 connection, up to eight or twelve I/O modules of the S7-300 automation system (assembly with bus connections or active bus modules) and if required a power supply
• Modules can be replaced during operation (hot swapping) with the bus modules active
• Can be supplied with integrated fiber optic interface if required
• Transmission rates up to 12 Mbit/s

Specification:

• Modular I/O system with degree of protection IP20, particularly suitable for user-specific and complex automation tasks
• Can be expanded with S7-300 automation system signal, communication and function modules
• Applicable Ex analog input or output modules with HART optimize the ET 200M for use in process engineering
• Can be used in redundant systems (S7-400H, S7-400F/FH)
• Consists of a PROFIBUS DP IM 153 connection, up to eight or twelve I/O modules of the S7-300 automation system (assembly with bus connections or active bus modules) and if required a power supply
• Modules can be replaced during operation (hot swapping) with the bus modules active
• Can be supplied with integrated fiber optic interface if required
• Transmission rates up to 12 Mbit/s
• Ex approval to Cat. 3 for Zone 2 acc. to ATEX100 a
• Fail-safe digital in/outputs as well as analog inputs for safetyoriented signal processing in accordance with PROFIsafe
• Support of modules with expanded user data, e.g. HART modules with HART minor variables
• Ex approval to Cat. 3 for Zone 2 acc. to ATEX100 aFail-safe digital in/outputs as well as analog inputs for safety oriented signal processing in accordance with PROFIsafe

We are offering of Siemens Distributed System S7400 H.

Features :

• Fault-tolerant automation system with the redundant design.    
• For applications with high fail-safety requirements. Processes with high restart costs, expensive downtimes, little supervision, and few maintenance options.
• Redundant central functions.
• Increases availability of I/O: switched I/O configuration.
• Also possible to use I/Os with standard availability: singlesided configuration.
• Hot stand-by: automatic reaction-free switching to the standby unit in the event of a fault.
• Configuration with two separate or one divided central rack.
• Connection of switched I/O via redundant PROFIBUS DP

We are offering a wide range of Distributed System for Redundant Systems .

Features :

• Can be combined from digital and analog in/output modules, technology modules, motor starters and frequency converters for the control of drives up to 7.5 or 4 kW.
• Exchange of modules during operation (hot swapping), permanent wiring with mulch-conductor connection
• Channel-specific diagnostics for high availability
• Can be supplied with integrated fiber optic interface if required
• Transmission rates up to 12 Mbit/s
• FastConnect using unstripped quick connection technology, screw or spring-loaded terminals
• Ex approval to Cat. 3 for Zone 2 acc. to ATEX100 a
• Slot reservation with spare modules
• Fail-safe DI modules with safety-related signal processing according to PROFIsafe
• Option handling – for simplest management of machine options

Applications:
You can connect virtually any number of I/O modules in virtually any combination right next to the interface module that transfers the data to the central controller. You can thus set the focus of your configuration on local requirements. Depending on the interface module, each ET 200S can consist of up to 63 modules – for example, power modules, I/O modules, and motor starters. The fact that motor starters can be integrated (switching and protecting any three-phase load up to 7.5 kW) ensures that the ET 200S can be quickly adapted to suit virtually any processrelated use of your machine. The fail-safe modules of the ET200S ensure the fail-safe reading and output of data tosafety category 4 (EN 954-1)

The ET 200S distributed I/O system is:

• Connected to PROFIBUS DP by means of a cable connector for PROFIBUS DP at the IM151-1 or 1M151-1 COMPACT interface module and
• Connected to PROFINET IO at the IM151-3PN interface module by a plug connector for PROFINET IO Every ET 200S peripheral system is
• A DP slave on the PROFIBUS DP or
• An IO device on the PROFINET IO.

We are offering a wide range of Siemens Distributed I/O System.